Item Description
Expert Cardan Shaft with ISO Certificate for Rolling mill
SWC-WH Welded shaft style, with out duration compensation | |||||||||||||||||||
TYPE | Gyration Diameter D/mm | Nominal torque Tn /kN·m |
Fatigue torque Tf /kN·m |
Bearing lifestyle ratio KL | Axis angel β/(.) |
Dimension/mm | Moment of inertia I/kg·m2 | Weight/kg | |||||||||||
Lmin | Done (js11) |
Dtwo (H7) |
D3 | Lm | n×Φd | k | t | b (h9) |
g | Lmin | Every single further 100m | Lmin | Every extra 100mm | ||||||
SWC100WH | 100 | 2.5 | 1.25 | five.795×10-four | ≤25 | 243 | eighty four | 57 | 60 | fifty five | 6×Φ9 | seven | 2.five | – | – | .004 | .0002 | 4.five | .35 |
SWC120WH | a hundred and twenty | five | 2.five | four.641×10-three | ≤25 | 307 | 102 | 75 | 70 | sixty five | 8×Φ11 | 8 | 2.five | – | – | .01 | .0004 | seven.7 | .fifty five |
SWC150WH | a hundred and fifty | 10 | 5 | .51×10-1 | ≤25 | 350 | a hundred thirty | 90 | 89 | 80 | 8×Φ13 | ten | three | – | – | .037 | .0016 | 18 | .85 |
SWC180WH | a hundred and eighty | 22.four | 11.2 | .245 | ≤15 | 480 | 155 | one zero five | 114 | a hundred and ten | 8×Φ17 | seventeen | 5 | 24 | 7 | .15 | .007 | 48 | two.8 |
SWC200WH | two hundred | 36 | 18 | 1.one hundred fifteen | ≤15 | five hundred | 170 | 120 | 133 | 115 | 8×Φ17 | 17 | five | 28 | eight | .246 | .013 | seventy two | 3.7 |
SWC225WH | 225 | fifty six | 28 | 7.812 | ≤15 | 520 | 196 | 135 | 152 | one hundred twenty | 8×Φ17 | 20 | 5 | 32 | nine | .365 | .571 | 78 | 4.nine |
SWC250WH | 250 | eighty | forty | two.82×10one | ≤15 | 620 | 218 | a hundred and fifty | 168 | a hundred and forty | 8×Φ19 | twenty five | six | forty | 12.5 | .847 | .571 | 124 | 5.three |
SWC285WH | 285 | one hundred twenty | fifty eight | 8.28×10one | ≤15 | 720 | 245 | one hundred seventy | 194 | one hundred sixty | 8×Φ21 | 27 | 7 | 40 | fifteen | one.756 | .051 | 185 | 6.3 |
SWC315WH | 315 | one hundred sixty | 80 | 2.79×102 | ≤15 | 805 | 280 | 185 | 219 | one hundred eighty | 10×Φ23 | 32 | eight | forty | fifteen | two.893 | .08 | 262 | eight |
SWC350WH | 350 | 225 | one hundred ten | 7.44×102 | ≤15 | 875 | 310 | 210 | 245 | 194 | 10×Φ23 | 35 | 8 | 50 | 16 | 4.814 | .146 | 349 | fifteen |
SWC390WH | 390 | 320 | one hundred sixty | 1.86×10three | ≤15 | 955 | 345 | 235 | 267 | 215 | 10×Φ25 | 40 | 8 | 70 | eighteen | eight.406 | .222 | 506 | 11.five |
SWC440WH | 440 | 500 | 250 | eight.25×10three | ≤15 | 1155 | 390 | 255 | 325 | 260 | 16×Φ28 | 42 | ten | eighty | twenty | fifteen.seventy nine | .474 | 790 | 21.7 |
SWC490WH | 490 | seven hundred | 350 | two.154×104 | ≤15 | 1205 | 435 | 275 | 351 | 270 | 16×Φ31 | forty seven | 12 | 90 | 22.5 | 27.seventy eight | .690 | 1104 | 27.three |
SWC550WH | 550 | one thousand | five hundred | 6.335×10four | ≤15 | 1355 | 492 | 320 | 426 | 305 | 16×Φ31 | 50 | twelve | one hundred | 22.5 | forty eight.32 | one.357 | 1526 | 34 |
construction | common | Flexible or Rigid | Rigid | Regular or Nonstandard | Nonstandard |
Materials | Alloy steel | Brand identify | QSCD | Spot or origin | HangZhou,China |
Model | SWC medium | Raw content | heat treatment method | Lenghth | count on specification |
Flange Dia | 160mm-620mm | Typical torque | rely on specification | Coating | weighty duty industrial paint |
Paint coloration | Customization | Software | Rolling mill equipment | OEM/ODM | Available |
Certification | ISO,SGS | Price tag | count on specification | Custom service | Available |
Regularly Asked Questions
Q5: Let’s chat about our inquiry?
This fall:Do you check all your merchandise prior to shipping?
A: Certainly, we do dynamic stability testing for all products,We can provide screening vedios.
Q3: What is your sample coverage?
A: You can get 1 piece sample to take a look at before quantity purchase.
Q2: What is your conditions of shipping?
A: FOB, CIF, CFR,EXW,DDU
Q1: What is your payment terms?
A: T/T 30% as deposit, and 70% just before delivery, we will present you the photographs of item and package deal on concluded.
US $1,000-5,000 / Piece | |
1 Piece (Min. Order) |
###
Standard Or Nonstandard: | Nonstandard |
---|---|
Shaft Hole: | 350 |
Torque: | 110kn.M |
Bore Diameter: | 110 |
Speed: | 1500 |
Structure: | Rigid |
###
Samples: |
US$ 1000/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
SWC-WH Welded shaft design, without length compensation | |||||||||||||||||||
TYPE | Gyration Diameter D/mm | Nominal torque Tn /kN·m |
Fatigue torque Tf /kN·m |
Bearing life ratio KL | Axis angel β/(.) |
Dimension/mm | Moment of inertia I/kg·m2 | Weight/kg | |||||||||||
Lmin | D1 (js11) |
D2 (H7) |
D3 | Lm | n×Φd | k | t | b (h9) |
g | Lmin | Each additional 100m | Lmin | Each additional 100mm | ||||||
SWC100WH | 100 | 2.5 | 1.25 | 5.795×10-4 | ≤25 | 243 | 84 | 57 | 60 | 55 | 6×Φ9 | 7 | 2.5 | – | – | 0.004 | 0.0002 | 4.5 | 0.35 |
SWC120WH | 120 | 5 | 2.5 | 4.641×10-3 | ≤25 | 307 | 102 | 75 | 70 | 65 | 8×Φ11 | 8 | 2.5 | – | – | 0.01 | 0.0004 | 7.7 | 0.55 |
SWC150WH | 150 | 10 | 5 | 0.51×10-1 | ≤25 | 350 | 130 | 90 | 89 | 80 | 8×Φ13 | 10 | 3 | – | – | 0.037 | 0.0016 | 18 | 0.85 |
SWC180WH | 180 | 22.4 | 11.2 | 0.245 | ≤15 | 480 | 155 | 105 | 114 | 110 | 8×Φ17 | 17 | 5 | 24 | 7 | 0.15 | 0.007 | 48 | 2.8 |
SWC200WH | 200 | 36 | 18 | 1.115 | ≤15 | 500 | 170 | 120 | 133 | 115 | 8×Φ17 | 17 | 5 | 28 | 8 | 0.246 | 0.013 | 72 | 3.7 |
SWC225WH | 225 | 56 | 28 | 7.812 | ≤15 | 520 | 196 | 135 | 152 | 120 | 8×Φ17 | 20 | 5 | 32 | 9 | 0.365 | 0.023 | 78 | 4.9 |
SWC250WH | 250 | 80 | 40 | 2.82×101 | ≤15 | 620 | 218 | 150 | 168 | 140 | 8×Φ19 | 25 | 6 | 40 | 12.5 | 0.847 | 0.028 | 124 | 5.3 |
SWC285WH | 285 | 120 | 58 | 8.28×101 | ≤15 | 720 | 245 | 170 | 194 | 160 | 8×Φ21 | 27 | 7 | 40 | 15 | 1.756 | 0.051 | 185 | 6.3 |
SWC315WH | 315 | 160 | 80 | 2.79×102 | ≤15 | 805 | 280 | 185 | 219 | 180 | 10×Φ23 | 32 | 8 | 40 | 15 | 2.893 | 0.08 | 262 | 8 |
SWC350WH | 350 | 225 | 110 | 7.44×102 | ≤15 | 875 | 310 | 210 | 245 | 194 | 10×Φ23 | 35 | 8 | 50 | 16 | 4.814 | 0.146 | 349 | 15 |
SWC390WH | 390 | 320 | 160 | 1.86×103 | ≤15 | 955 | 345 | 235 | 267 | 215 | 10×Φ25 | 40 | 8 | 70 | 18 | 8.406 | 0.222 | 506 | 11.5 |
SWC440WH | 440 | 500 | 250 | 8.25×103 | ≤15 | 1155 | 390 | 255 | 325 | 260 | 16×Φ28 | 42 | 10 | 80 | 20 | 15.79 | 0.474 | 790 | 21.7 |
SWC490WH | 490 | 700 | 350 | 2.154×104 | ≤15 | 1205 | 435 | 275 | 351 | 270 | 16×Φ31 | 47 | 12 | 90 | 22.5 | 27.78 | 0.690 | 1104 | 27.3 |
SWC550WH | 550 | 1000 | 500 | 6.335×104 | ≤15 | 1355 | 492 | 320 | 426 | 305 | 16×Φ31 | 50 | 12 | 100 | 22.5 | 48.32 | 1.357 | 1526 | 34 |
###
structure | universal | Flexible or Rigid | Rigid | Standard or Nonstandard | Nonstandard |
Material | Alloy steel | Brand name | QSCD | Place or origin | Qingdao,China |
Model | SWC medium | Raw material | heat treatment | Lenghth | depend on specification |
Flange Dia | 160mm-620mm | Normal torque | depend on specification | Coating | heavy duty industrial paint |
Paint color | Customization | Application | Rolling mill machinery | OEM/ODM | Available |
Certificate | ISO,SGS | Price | depend on specification | Custom service | Available |
US $1,000-5,000 / Piece | |
1 Piece (Min. Order) |
###
Standard Or Nonstandard: | Nonstandard |
---|---|
Shaft Hole: | 350 |
Torque: | 110kn.M |
Bore Diameter: | 110 |
Speed: | 1500 |
Structure: | Rigid |
###
Samples: |
US$ 1000/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
SWC-WH Welded shaft design, without length compensation | |||||||||||||||||||
TYPE | Gyration Diameter D/mm | Nominal torque Tn /kN·m |
Fatigue torque Tf /kN·m |
Bearing life ratio KL | Axis angel β/(.) |
Dimension/mm | Moment of inertia I/kg·m2 | Weight/kg | |||||||||||
Lmin | D1 (js11) |
D2 (H7) |
D3 | Lm | n×Φd | k | t | b (h9) |
g | Lmin | Each additional 100m | Lmin | Each additional 100mm | ||||||
SWC100WH | 100 | 2.5 | 1.25 | 5.795×10-4 | ≤25 | 243 | 84 | 57 | 60 | 55 | 6×Φ9 | 7 | 2.5 | – | – | 0.004 | 0.0002 | 4.5 | 0.35 |
SWC120WH | 120 | 5 | 2.5 | 4.641×10-3 | ≤25 | 307 | 102 | 75 | 70 | 65 | 8×Φ11 | 8 | 2.5 | – | – | 0.01 | 0.0004 | 7.7 | 0.55 |
SWC150WH | 150 | 10 | 5 | 0.51×10-1 | ≤25 | 350 | 130 | 90 | 89 | 80 | 8×Φ13 | 10 | 3 | – | – | 0.037 | 0.0016 | 18 | 0.85 |
SWC180WH | 180 | 22.4 | 11.2 | 0.245 | ≤15 | 480 | 155 | 105 | 114 | 110 | 8×Φ17 | 17 | 5 | 24 | 7 | 0.15 | 0.007 | 48 | 2.8 |
SWC200WH | 200 | 36 | 18 | 1.115 | ≤15 | 500 | 170 | 120 | 133 | 115 | 8×Φ17 | 17 | 5 | 28 | 8 | 0.246 | 0.013 | 72 | 3.7 |
SWC225WH | 225 | 56 | 28 | 7.812 | ≤15 | 520 | 196 | 135 | 152 | 120 | 8×Φ17 | 20 | 5 | 32 | 9 | 0.365 | 0.023 | 78 | 4.9 |
SWC250WH | 250 | 80 | 40 | 2.82×101 | ≤15 | 620 | 218 | 150 | 168 | 140 | 8×Φ19 | 25 | 6 | 40 | 12.5 | 0.847 | 0.028 | 124 | 5.3 |
SWC285WH | 285 | 120 | 58 | 8.28×101 | ≤15 | 720 | 245 | 170 | 194 | 160 | 8×Φ21 | 27 | 7 | 40 | 15 | 1.756 | 0.051 | 185 | 6.3 |
SWC315WH | 315 | 160 | 80 | 2.79×102 | ≤15 | 805 | 280 | 185 | 219 | 180 | 10×Φ23 | 32 | 8 | 40 | 15 | 2.893 | 0.08 | 262 | 8 |
SWC350WH | 350 | 225 | 110 | 7.44×102 | ≤15 | 875 | 310 | 210 | 245 | 194 | 10×Φ23 | 35 | 8 | 50 | 16 | 4.814 | 0.146 | 349 | 15 |
SWC390WH | 390 | 320 | 160 | 1.86×103 | ≤15 | 955 | 345 | 235 | 267 | 215 | 10×Φ25 | 40 | 8 | 70 | 18 | 8.406 | 0.222 | 506 | 11.5 |
SWC440WH | 440 | 500 | 250 | 8.25×103 | ≤15 | 1155 | 390 | 255 | 325 | 260 | 16×Φ28 | 42 | 10 | 80 | 20 | 15.79 | 0.474 | 790 | 21.7 |
SWC490WH | 490 | 700 | 350 | 2.154×104 | ≤15 | 1205 | 435 | 275 | 351 | 270 | 16×Φ31 | 47 | 12 | 90 | 22.5 | 27.78 | 0.690 | 1104 | 27.3 |
SWC550WH | 550 | 1000 | 500 | 6.335×104 | ≤15 | 1355 | 492 | 320 | 426 | 305 | 16×Φ31 | 50 | 12 | 100 | 22.5 | 48.32 | 1.357 | 1526 | 34 |
###
structure | universal | Flexible or Rigid | Rigid | Standard or Nonstandard | Nonstandard |
Material | Alloy steel | Brand name | QSCD | Place or origin | Qingdao,China |
Model | SWC medium | Raw material | heat treatment | Lenghth | depend on specification |
Flange Dia | 160mm-620mm | Normal torque | depend on specification | Coating | heavy duty industrial paint |
Paint color | Customization | Application | Rolling mill machinery | OEM/ODM | Available |
Certificate | ISO,SGS | Price | depend on specification | Custom service | Available |
Drive shaft type
The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are three main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
tube yoke
Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
end yoke
If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join two heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new one or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.
editor by czh 2023-01-28